2 Minute Read
| Overview
Based on the year a CCU tablet was manufactured and delivered, it was built on a different kernel version.
And based on the kernel version the CCU tablet was built on each tablet was supported with a different set of features.
Since Airoverse has been supporting customer with their Intelligent BMS for years. For customers supported with the 10" Iproda CCU Tablet there were different customers using a CCU tablet built on different Kernel versions. It was extremely important to keep the customers and the support folks, or at least the support folks, on the features supported on the tablets build on different Kernel versions.
| Features Based on Kernel Version
Below are tables that lists the features specific to a Kernel version on which the CCU Tablet is built.
| Kernel Ver | Pre-Installed Airoverse App by Irpoda | Compatible Adaptor USB2.0 to RJ45 | SE Linux Mode | MTK log folder | MAC id Changing while reboot |
Assigning LAN Static IP |
USB to RS485 | ||||
| V2 Ver. | CCU | Cable Matters | TP LinkUS2.0 | BAFWO | Wifi | Ethernet | |||||
|
Tanga_Tab_ 20190419 |
Yes | No | Yes | no | yes | Permissive | Yes | Need to Be Verified | No | No | |
|
T8045PC_ 20200818 |
Yes | Yes | No | Yes | No | Enforcing | Yes | No | Yes | ||
|
T8045PC_ 20210519 |
Yes | Yes | Yes | Yes | No | Enforcing | Yes | No | Yes | ||
|
T8045PC_ 20210623 |
Yes | Yes | Yes | Yes | No | Permissive | Yes | No | Yes | ||
| Important Aspects to be Considered
- Kernel 20210519 can be updated to 20210623 Kernel which is Permissive Mode
- Delete all the MTK folders prior to Commissioning
- Delete all pre-installed Airoverse app's (V2 and CCU) and HomePage app. Re-Install with Current version of CCU app and Airoverse Homepage
- All Airoverse apps should be in system/priv-app path only.
- Kernel 20190419 when installed with current CCU version app. Team needs to check USB to RS485 functions.
Comments
0 comments
Please sign in to leave a comment.